Author: cclau88

FIRST LEVEL TROUBLESHOOTING GUIDE  第一级

 

SECOND LEVEL TROUBLESHOOTING GUIDE  第二级

(A) SYMPTOM: INCOMPLETE FILL

Cause:        Insufficient Volume

Solution:   Add Rubber

Cause:        Trapped Air

Solution:   Space Out Rubber

(B) SYMPTOM: TEARING

Cause:        Insufficient Volume

Solution:   Add Rubber

Cause:        Too High Pressure

Solution:   Increase Rubber Thickness (Recommended Pressure for Auto Mold at 10-40T, Manual Mold at 80-130T)

Cause:        Over Cure

Solution:   Reduce Cure Time (Recommended Cure Time at 300-400 Sec)

(C) SYMPTOM: STICKING

Cause:        Poor Cure

Solution:   Increase Cure Time, Increase Mold Temperature, Rubber Sheet is still Frozen

(D) SYMPTOM: INSUFFICIENT CLEANING PERFORMANCE

Cause: Insufficient Rubber

Solution: Add Cut Rubber at Cavity Edge

 

THIRD LEVEL TROUBLESHOOTING GUIDE  第三极

If Incomplete Fill still persists, change rubber placement position and add rubber or space-out rubber

www.Skymart-Technologies.com

We propose the following settings and parameters for our Mold Cleaning Rubber Sheet and Mold Waxing Rubber Sheet.

Please contact Us if you required discussion or additional advice to your mold cleaning and waxing operations.

www.Skymart-Technologies.com